Snowman Figural

STL Image of Snowman

STL Image of Snowman’s Hat, with hole for Light

STL Image of Snowman’s Nose

This figural uses two parts form a thing created by user e-nozzel and placed on Thingverse at https://www.thingiverse.com/thing:613303

I have placed the STL files used here, as well as the readme and license in a zip here, just to ‘ensure’ that the files I used are not broken by any future updates, or lost by any deletion.

These files need to be resized to fit the 9mm light mounting hole used with out figural lights, the information is below.

Snowman

Suggested Colour: Cold White (Schneemann_highpoly_less_overhang.stl in Zip)

Print Options:

• Spiral Vase

• Top Shell Layers : 0

• Wall Loops: 1

• Sparse Infill Density: 0

• Scale: 44%

Total Filament: 0.77m

Print Time (Creality K1): 40m 37s

Snowman’s Nose

Suggested Colour: Red (nase.stl in Zip)

Print Options:

• Brim Type: No Brim

• Scale: 44%

Total Filament: 0.00m (it’s very small, and fiddly, you might need a few attempts before it doesn’t get mucked up. It also produces odd warnings)

Print Time (Creality K1): 17s

Snowman’s Hat

File: SnowmansHat.stl

Suggested colour : Black

Print Options:

• Auto Orient

Total Filament: 0.77m

Print Time (Creality K1): 40m 38s

Finishing and Assembly

The Nose is glued onto the Snowman using a dab of superglue. The eyes, mouth and buttons are painted with black paint.

Simply slide the Hat over the Light Base and then slide the Snowman over the Light Base, the Snowman is a close fit, the Hat a bit less so and just rests on the top of the Snowman.